The official notification for SSC JE 2017 examination has been released. Now, all the candidates who wish to apply for Junior Engineer Civil, Mechanical, and Electrical posts under SSC JE 2017 can go to the Staff Selection Commission (SSC) website to apply online. SSC JE 2017 examination will be an open competitive Computer Based Examination for recruitment of Junior Engineers Group-B (Non-Gazetted) posts.
The online application process for SSC JE Application has started on October 21 and will continue till November 17, 2017. The examination will be conducted from January 5 to January 8, 2018
SSC JE 2017 Vacancy
A large number of vacancies have been notified in different government departments. SSC said that the number of vacancies in the organisations listed below has not been finalised. The list of organisations may also undergo a change depending upon vacancies available therein, before processing of results. Only male candidates are eligible for the posts of Junior Engineers in Director General Border Roads Organisation (BRO), Ministry of Defence. 1. Central Water Commission – Junior Engineer (Civil) 2. Central Water Commission – Junior Engineer (Mechanical) 3. CPWD – Junior Engineer (Civil) 4. CPWD – Junior Engineer (Electrical) 5. Department of Post – Junior Engineer (Civil) 6. MES – Junior Engineer (Civil) 7. MES – Junior Engineer (Electrical and Mechanical) 8. MES – Junior Engineer (Quantity Surveying and Contract) 9. Farrakka Barrage (Project) – Junior Engineer (Civil) 10. Farrakka Barrage (Project) – Junior Engineer (Electrical) 11. Farrakka Barrage (Project) – Junior Engineer (Mechanical) 12. Director General Border Roads Organisation – Junior Engineer (Civil) 13. Director General Border Roads Organisation – Junior Engineer (Electrical) 14. Director General Border Roads Organisation – Junior Engineer (Mechanical) 15. Central Water Power Research Station – Junior Engineer (Civil) 16. Central Water Power Research Station – Junior Engineer (Electrical/Mechanical) 17. Dte. Of Quality Assurance (Naval) – Junior Engineer (Naval Quantity Assurance) – (Mechanical) 18. Dte. Of Quality Assurance (Naval) – Junior Engineer (Naval Quantity Assurance)- (Electrical) 19. National Technical Research Organisation – Junior Engineer (Civil) 20. National Technical Research Organisation – Junior Engineer (Electrical) 21. National Technical Research Organisation – Junior Engineer (Mechanical)
SSC JE 2017 Pay Scale
Staff Selection Commission will hold an open competitive Computer Based Examination for recruitment of Junior Engineers Group-„B‟ (Non-Gazetted) posts, in Level- 6 (Rs.35400-112400/-) of pay matrix of 7th CPC w.e.f. 22nd January 2018 to 29th January 2018.
|Post||Grade Pay||Gross Salary|
|Junior Engineer (Civil)||4,200||32667 – 37119|
|Junior Engineer (Mechanical)||4,200||32667 – 37119|
|Junior Engineer (Electrical)||4,200||32667 – 37119|
|Junior Engineer(Electrical and Mechanical)||4,200||32667 – 37119|
|Junior Engineer (Quantity Surveying & Contract)||4,200||32667 – 37119|
SSC JE 2017 Important Dates
|Starting Date to Fill SSC JE Online Application Forms 2017||21st October 2017|
|Last Date to Apply Online for SSC JE 2017 Exam||17th November 2017|
|SSC JE 2017 Tier-I Admit Card Release Date||December 2017|
|SSC JE 2017 Tier-I Exam Date (CBE* )||January 22 to 29, 2018|
|SSC JE Tier-I Result 2017 Declaration Date||April 4, 2018|
|SSC JE Tier-II Admit Card 2017||Yet to be decided|
|SSC JE Tier-II Exam Date 2017 (DES)||Yet to be decided|
|SSC JE Tier-II Result 2017||Yet to be decided|
SSC JE 2017 Eligibility Criteria
Staff Selection Commission has fixed criteria on education qualification. A candidate has to fulfil it before applying for the SSC JE 2017. All the candidates who have the requisite qualifications can go to the website of SSC to fill the online application form. The educational qualification for SSC JE recruitment has two sub-categories, one for Civil Engineering and the other for Mechanical Engineering.
LATEST UPDATE: SSC JE 2017 Answer Keys for Paper – I released at ssc.nic.in: Check latest SSC updates
SSC JE Application Form 2017
To fill the online application form for SSC JE for part I candidates have to fill in all the common details such as name, mother's name, father's name, address, email address, mobile number, domicile, category etc. After completing the full online form of the SSC JE part I candidates have to click on submit button. In this way, they will get the registration number and password for the part II registration. In the next process applicants, have to input their application id and password to apply for part II registration. In part, second registration candidates have to submit educational qualifications and then they will have to upload scanned copies of passport size photographs and signatures at the specified size. There is some necessary information that candidates should have in their mind while filling the online application form. Mind all these points mentioned below before filling the SSC Junior Engineer online application form.
- As a first step, the candidates are supposed to register online on the website and fill out the application form within the time period provided.
- Only online applications are required to be submitted at the official website for SSC JE 2017 Recruitment process.
- Only one online application is permitted to be submitted by an applicant for the posts of Junior Engineer (Civil, Mechanical & Electrical & Quantity Surveying & Contract).
- Consequently, the applicants are recommended to exercise due persistence at the time of filling their application forms.
- At the time of appearing in the examination, the candidates will be compulsory to submit a SSC JE 2017 Application From that he has submitted only one application.
- In case of multiple applications, the last application for which Part-I and Part-II registration have been completed will be accepted.
SSC JE 2017 Exam Pattern
SSC JE 2017 Examination will take place in two stages. The paper first will be of 200 marks whereas the paper second will carry 300 marks. Total 1/4th marks will be deducted for each wrong answer. According to the examination pattern of SSC JE by the Staff Selection Commission, the appearing applicants for the post of JE (Civil), JE (quantity surveying & contract) should attempt Part A (civil & structural) of papers I & II. On the other hand, appearing aspirants for JE (electrical) need to attempt Part B (electrical) & the candidates appearing for JE (mechanical) have to attempt Part C (mechanical) of Paper I & II. The candidates appearing for the post of Junior Engineer (Civil), Junior Engineer (Quantity Surveying & Contract) should attempt Part A (Civil & Structural) of Paper-I and Paper-II and the candidates appearing for the post of Junior Engineer (Electrical) should attempt Part-B (Electrical) and the candidates appearing for the post of Junior Engineer (Mechanical) should attempt Part C (Mechanical) of Paper-I and Paper-II failing which his/her answer sheet (Paper-II) will not be evaluated. Paper-I will consist of Objective Type Multiple Choice questions only. Candidates who are shortlisted on the basis of performance in Paper –I will be called for Paper-II (Conventional Type). There will be a negative marking of 0.25 marks for each wrong answer in Paper-I. Candidates are, therefore, advised to keep this in mind while answering the questions.
|Paper||Subjects||Max. Marks||Duration Of Exam|
|Paper – I Objective Computer Based||General Intelligence & Reasoning||50||2 Hours|
|Part A- General Engineering (civil & structural)||100|
|Part B- General Engineering (electrical)|
|Part C- General Engineering (mechanical)|
|Paper – II (Conventional)||Part A- General Eng. (civil & structural)||300||2 Hours|
SSC JE 2017 Syllabus
The standard of the questions in Engineering subjects will be approximate of the level of Diploma in Engineering (Civil/ Electrical/ Mechanical/Electronics) from a recognized Institute, Board or University recognized by All India Board of Technical Education. All the questions will be set in SI units. The details of the syllabus are given below: Paper-I
- General Intelligence & Reasoning: The Syllabus for General Intelligence would include questions of both verbal and non-verbal types. The test may include questions on analogies, similarities, differences, space visualization, problem-solving, analysis, judgement, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series etc. The test will also include questions designed to test the candidate‟s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.
- General Awareness: Questions will be aimed at testing the candidate‟s general awareness of the environment around him/her and its application to society. Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighbouring countries especially pertaining to History, Culture, Geography, Economic Scene, General Polity and Scientific Research, etc. These questions will be such that they do not require a special study of any discipline.
General Engineering (Civil and Structural), (Electrical & Mechanical):
Part-A Civil Engineering – Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation Engineering, Transportation Engineering, Environmental Engineering. Structural Engineering: Theory of Structures, Concrete Technology, RCC Design, Steel Design. Part-B Electrical Engineering – Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors and single phase induction Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics. Part-C Mechanical Engineering – Theory of Machines and Machine Design, Engineering Mechanics and Strength of Materials, Properties of Pure Substances, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC Engines Combustion, IC Engine Cooling & Lubrication, Rankine cycle of System, Boilers, Classification, Specification, Fitting & Accessories, Air Compressors & their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles & Steam Turbines. Properties & Classification of Fluids, Fluid Statics, Measurement of Fluid Pressure, Fluid kinematics, Dynamics of Ideal fluids, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classification of steels. Paper II Part-A: Civil & Structural Engineering
Building Materials : Physical and Chemical properties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based products, laminates, bituminous materials, paints, varnishes. Estimating, Costing and Valuation: estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, and Plastering. Boundary wall, Brick building, Water Tank, Septic tank, bar bending schedule, Centre line method, Mid-section formula, Trapezodial formula, Simpson‟s rule. Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation. Surveying : Principles of surveying, measurement of distance, chain surveying, working of prismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment. Soil Mechanics : Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses. Index properties of soils, Atterberg‟s limits, ISI soil classification and plasticity chart. Permeability of soil, coefficient of permeability, determination of coefficient of permeability, Unconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation pressure, normally consolidated soil, e-log p curve, computation of ultimate settlement. Shear strength of soils, direct shear test, Vane shear test, Triaxial test. Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, bearing capacity of soils, plate load test, standard penetration test. Hydraulics : Fluid properties, hydrostatics, measurements of flow, Bernoulli‟s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pumps and turbines. Irrigation Engineering: Definition, necessity, benefits, 2II effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc. Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Command area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies. Different type of canals, types of canal irrigation, loss of water in canals. Canal lining – types and advantages. Shallow and deep to wells, yield from a well. Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy‟s theory of critical velocity. Lacey‟s theory of uniform flow. Definition of flood, causes and effects, methods of flood control, water logging, preventive measure. Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes. Major irrigation projects in India. Transportation Engineering: Highway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering- Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards. Traffic Engineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety. Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments. Surface water drainage. Solid waste management – types, effects, engineered management system. Air pollution – pollutants, causes, effects, control. Noise pollution – cause, health effects, control.
Theory of structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams. Moment of area and moment of inertia for rectangular & circular sections, bending moment and shear stress for tee, channel and compound sections, chimneys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and columns, Torsion of circular section. Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, importance of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures. RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams. T-beams, lintels. One way and two way slabs, isolated footings. Reinforced brick works, columns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods). Steel Design: Steel design and construction of steel columns, beams roof trusses plate girders. Part-B (Electrical Engineering): Basic concepts: Concepts of resistance, inductance, capacitance, and various factors affecting them. Concepts of current, voltage, power, energy and their units. Circuit law: Kirchhoff‟s law, Simple Circuit solution using network theorems. Magnetic Circuit: Concepts of flux, mmf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc. Electromagnetic induction, self and mutual induction. AC Fundamentals: Instantaneous, peak, R.M.S. and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of R.L. and C, Resonance, Tank Circuit. Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-C circuit. Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement. Measurement of frequency and phase angle. Ammeter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges. Use of CRO, Signal Generator, CT, PT and their uses. Earth Fault detection. Electrical Machines : (a) D.C. Machine – Construction, Basic Principles of D.C. motors and generators, their characteristics, speed control and starting of D.C. Motors. Method of braking motor, Losses and efficiency of D.C. Machines. (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, O.C. and S.C. Tests, Losses and efficiency. Effect of voltage, frequency and wave form on losses. Parallel operation of 1 phase /3 phase transformers. Auto transformers. (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, and starting and speed control of 3 phase induction motors. Methods of braking, effect of voltage and frequency variation on torque speed characteristics. Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications. Synchronous Machines – Generation of 3-phase e.m.f. armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power. Starting and applications of synchronous motors. Generation, Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand factor, cost of generation, inter-connection of power stations. Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults. Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, H.R.C. Fuses, Protection against earth leakage / over current, etc. Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars. Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system. Cable – Different type of cables, cable rating and derating factor. Estimation and costing: Estimation of lighting scheme, electric installation of machines and relevant IE rules. Earthing practices and IE Rules. Utilization of Electrical Energy: Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors. Basic Electronics: Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PNP type), BJT and JFET. Simple circuits using these devices. Part- C (Mechanical Engineering): Theory of Machines and Machine Design Concept of simple machine, four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors – Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots. Engineering Mechanics and Strength of Materials Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of columns – Euler‟s and Rankin‟s theories, Thin walled pressure vessels. Thermal Engineering Properties of Pure Substances : p-v & P-T diagrams of pure substance like H2O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status. Definition of dryness fraction of steam, degree of superheat of steam. H-s chart of steam (Mollier‟s Chart). 1st Law of Thermodynamics : Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic process, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow Energy Equation. 2nd Law of Thermodynamics : Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pump & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2nd Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, Entropy, Entropy change calculation of ideal gas processes. Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility. Air standard Cycles for IC engines: Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency. IC Engine Performance, IC Engine Combustion, IC Engine Cooling & Lubrication. Rankine cycle of steam: Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pump work. Boilers; Classification; Specification; Fittings & Accessories: Fire Tube & Water Tube Boilers. Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeraton Plant; Nozzles & Steam Turbines Fluid Mechanics & Machinery Properties & Classification of Fluid: ideal & real fluids, Newton‟s law of viscosity, Newtonian and Non-Newtonian fluids, compressible and incompressible fluids. Fluid Statics: Pressure at a point. Measurement of Fluid Pressure: Manometers, U-tube, Inclined tube. Fluid Kinematics: Stream line, laminar & turbulent flow, external & internal flow, continuity equation. Dynamics of ideal fluids: Bernoulli‟s equation, Total head; Velocity head; Pressure head; Application of Bernoulli‟s equitation. Measurement of Flow rate Basic Principles: Venturimeter, Pilot tube, Orifice meter. Hydraulic Turbines: Classifications, Principles. Centrifugal Pumps: Classifications, Principles, Performance. Production Engineering Classification of Steels: mild steal & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Techniques i.e. TIG, MIG, etc. (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) Drilling (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.
SSC JE 2017 Selection Procedure
There will be two stages for the selection of candidates. The candidates will have to obtain at least passing marks for being selected in SSC JE posts. These two stages are given below: Stage 1: Computer Based Test
- Computer Based Test (CBT) will be organized for Paper-I.
- The Paper-I of SSC JE will be of Objective type.
- The paper first will carry 200 marks in total containing General Intelligence and Reasoning, General Awareness,
- Part A: General Engineering (Civil and Structural)
- Part B: General Engineering (Electrical) and
- Part C: General Engineering (Mechanical)
- Applicants who are shortlisted on the basis of performance in Paper-I will be called for Paper –II (Conventional Type)
- The Paper –I will be conducted from December 3 to 5, 2017
Stage 2: Written Examination
- The Paper II will be conventional type
- The paper second will carry total 300 marks.
- Part A: General Engineering (Civil and Structural)
- Part B: General Engineering (Electrical)
- Part C: General Engineering (Mechanical)
The final assessment of applicants will be confirmed on the basis of the marks obtained by the aspirants in both Paper-I and Paper-II. The preferences of the posts entered by the candidates will also be given due prominence. Provision to the departments will be completed on the basis of merit. Candidates will be shortlisted and recommended for appointment by the Commission on the basis of their total marks in the Paper – I & II and preference for the posts. Candidates, who are appointed on the basis of this examination, shall be on probation for a period of two years and during the period of probation, the candidates would be required to undergo such training or pass such examinations as prescribed by the Controlling Authority. On successful completion of the period of probation, the candidates shall, if considered fit for permanent appointment, be confirmed to their post by the Controlling Authority.
SSC JE Admit Card 2017
SSC is likely to release the admit card on the official website regions wise at least 10-15 days before the exam. Candidates will be able to download SSC JE Admit Card 2017 by using their registration number and date of birth. Candidates. The candidates who qualify in the tier I exam will move to tier II exam.
SSC JE Cut Off 2017
SSC JE 2017 Cut off mark will depend on the level of examination. Usually, the cut off goes up if the papers are easy as more number of students are able to solve more question. Following are the tentative cut-off one can expect based on past results.
|Category||Electrical/Mechanical Engineering Cut Off||Civil Engineering Cut Off|
SSC JE Answer Keys 2017
Answer Keys will be placed on the Commission's website after the Examination. Candidates may go through the Answer Keys corresponding to their Test Form and submit representations, if any, within the time limit given by the Commission through on-line modality only, on payment of Rs. 100/- per answer. Any representation regarding Answer Key received within the time limit fixed by the Commission at the time of uploading of the Answer Key will be scrutinized and the decision of the Commission in this regard will be final. No. representation regarding Answer Keys shall be entertained, afterwords.
SSC JE Result 2017
After competition of examination on January 8, SSC will release answer keys, thereafter SSC JE 2017 Result for the Tier-I exam would be announced. As per last year pattern, it may be declared in the month of March / April 2018. The results are usually announced in pdf format. Student need to find their name or roll number in the result. If they qualify for the tier II exam, their names and roll number will appear in the merit list.
How to apply online for SSC JE 2017
- On-line application will be available from October 18, 2017 to November 18, 2017 upto 5.00 PM).
- To apply for the examination, candidates are required to register themselves on http://ssconline.nic.in. Candidates may register once and can apply for any Recruitment Examinations advertised by SSC.
- The Registration facility is available to the candidates throughout the year on website.
- In the Registration Part, candidates will have to fill in basic information relating to them. On submission of details, candidates shall be prompted to check the details and make, corrections, if any, before submitting the Form.
- On submission of the Registration Form, a page with Registration ID and password will appear.
- Note down the Registration ID and Password and keep them safely. This would be your permanent Registration ID & Password which would be required to apply for Selection Posts as well as for any other Recruitment Examination of the Commission.
- The photograph must be uploaded in jpg format. The digital size of file of the photographs must be more than 4 KB and less than 20 KB. The signature must be uploaded in jpg format. The digital size of the signature file must be more than 1 KB and less than 12 KB. The Registration becomes complete only after the photograph and signature are uploaded by the candidate.
- After completion of the Registration Part the candidates should proceed to fill up the Online Application Form. Candidates already registered earlier can directly log into the system and proceed to fill up the Application Form.
- The facility of online application (including payment of fees through SBI net banking / Credit or debit cards of any banks) will be available from 21-10-2017 to 17-11-2017 (upto 5.00 PM). However, candidates who wish to make the payment through challan of SBI, may make the payment to designated branches of SBI within the working hours of bank up to 20.11.2017 provided the challan has been generated by them before 5.00 PM of 17.11.2017.